Handheld Laser Marking Machine

Features of Handheld Laser Engraving Machine:

1.High speed with galvanometer.
2.Small volume, light weight.
3.Low power, consumption power is less than 500w.
4.Completely air cooling, low energy.
5.No influence of the severe environment and temperature change. If no power, battery and car cigarette lighter can be used for working.
6.Greatly reduce the depreciation cost, satisfying customers’ stable large quantities producing.

What is the application of handheld laser engraving machine?

Engraving QR Code on Car Tyres using handheld laser engraving machine is widely used to mark on various plastic buttons and electric devices, to mark code on CMOS chip, color paper and food package. It can also be used in the scope with high requirements, such as clock, jewelry, module, bitmap marking etc.

What is specifications of handheld laser engraving machine?

Model
D100
Laser Power
20W/30W/50W
Laser Wavelength
1064nm
Q-frequency
20KHz~100KHz
Divergence
0.3mard
Marking Range
100*100mm/200*200mm/300*300mm
Minimum Line Width
0.02mm
Minimum Character
0.15mm
Marking Depth
0 ~0.5mm
Engraving Line Speed
≤10000mm/s
Repeatability Accuracy
±0.001mm
Beam Quality
M2:1.2~1.8
Marking Format
Graphics, Text, Bar Codes, Two-dimensional Code, Automatically Marking the Date,
Batch number, Serial number, Frequency, etc.
Graphic Format Supported
bmp, jpg, gif, tga, png, tif, ai, dxf, dst, plt, etc.
Working Voltage
100V-240V 50-60Hz/4A
Unit Power
<500W
Use of the Environment
Clean and Dust Free or Dust less
Working Condition: Humidity
5%-75%, Free of Condensed Water
Laser Module Life
>100000 hours
Control System
Windows (10inch touch screen)

Engraving QR Code on Car Tyres using handheld laser engraving machine is widely used to mark on various plastic buttons and electric devices, to mark code on CMOS chip, color paper and food package. It can also be used in the scope with high requirements, such as clock, jewelry, module, bitmap marking etc.

Engraving QR Code on Car Tyres using handheld laser engraving machine is widely used to mark on various plastic buttons and electric devices, to mark code on CMOS chip, color paper and food package. It can also be used in the scope with high requirements, such as clock, jewelry, module, bitmap marking etc.

Engraving QR Code on Car Tyres using handheld laser engraving machine is widely used to mark on various plastic buttons and electric devices, to mark code on CMOS chip, color paper and food package. It can also be used in the scope with high requirements, such as clock, jewelry, module, bitmap marking etc.

Send your message to us:

cycjet© All Rights Reserved2019